Skip to content
My GreenhouseLab
  • Start here
  • Guides
  • Ventilation
  • Climate system
  • Our method

Automation

Practical greenhouse automation guides covering automatic vent openers, thermostat wiring, digital sensors, and environmental controllers.

Greenhouse Fan Thermostat Buying Guide: Match Motor Load, Deadband & Moisture

October 8, 2026 by My Greenhouse Lab Editorial Team
Greenhouse fan thermostat selection diagram comparing industrial bimetal, digital dual-stage, and smart EC controllers alongside motor FLA and deadband checks.

Avoid burnt relays and short-cycling. Compare industrial bimetal, digital dual-stage, and smart controllers by motor FLA, deadband, and moisture rating.

Categories Automation

Greenhouse Automation: Build One Reliable Control Loop at a Time

September 20, 2026 by My Greenhouse Lab Editorial Team
Hobby greenhouse with a sensor, controller, roof vent, fan, irrigation line, and blank monitoring notebook.

Build greenhouse automation around one observable control path. Map its sensor, decision, action, verification, and fallback before expanding the system.

Categories Automation

Greenhouse Climate Control Checklist: Seasonal System Check

September 10, 2026September 10, 2026 by My Greenhouse Lab Editorial Team
Greenhouse workspace with a fan, roof vent, shade cloth, sensor, heater, and seasonal checklist.

Prepare greenhouse climate controls before conditions change. Check each response path, compare expected and observed behavior, and record PASS, WATCH, SERVICE, or STOP.

Categories Automation

Greenhouse Fan Thermostat Compatibility Checklist

September 9, 2026September 5, 2026 by My Greenhouse Lab Editorial Team
Greenhouse workspace with a wall-mounted fan and temperature sensor on a table.

A greenhouse thermostat must match the fan job and documented control requirements. Use this worksheet to decide FIT, VERIFY, SKIP, or STOP without guessing.

Categories Automation

Greenhouse Climate Monitoring: Turn Sensor Readings Into Actionable Alerts

September 9, 2026August 30, 2026 by My Greenhouse Lab Editorial Team
Greenhouse climate sensor beside a notebook for recording temperature and humidity observations

Build a bounded greenhouse monitoring workflow that turns sensor readings into alerts, logs, inspections, or stop conditions without universal thresholds.

Categories Automation

Automatic Greenhouse Vent Opener Compatibility Guide + Printable Worksheet

August 20, 2026 by My Greenhouse Lab Editorial Team

Verify an automatic greenhouse vent opener against the exact vent, manual, geometry, limits, and seasonal conditions before assuming fit.

Categories Automation

Recent Posts

  • Greenhouse Insulation: Seal Leaks, Cut Heat Loss, and Avoid Light and Moisture Traps
  • Greenhouse Heating Systems: Choose Air, Water, or Root-Zone Heat
  • How to Size a Greenhouse Heater: BTU Heat-Loss Worksheet
  • Greenhouse Ventilation Diagrams: Visual Guide to Active, Passive & HAF Airflow
  • Best Solar Greenhouse Fans: Match Panel Wattage, Real CFM & Battery Backup

Recent Comments

No comments to show.
My GreenhouseLab

Clear guidance for a greenhouse that breathes.

Evidence-led · Assumptions visible · Independently reviewed

Follow the lab

Pinterest X Instagram

Explore

Start here Ventilation guide Climate system

Standards

Editorial policy About Contact
© 2026 My Greenhouse Lab
Privacy Terms
Clearer greenhouse climate decisions