Field library / 25 guides
Start with a system guide, use a calculator when inputs are known, or open a focused guide for the part blocking progress.
Topic
Practical, evidence-led guides for this part of the greenhouse climate system.
Browse chronological archive ↗Learn how passive vents, exhaust fans, intake openings, circulation fans, and controls work together—and how to find the weak link in a hot, humid, or stagnant greenhouse.
Read guide ↗Calculate a source-specific summer exhaust-airflow estimate, convert it to equivalent ACH, check intake area, and compare fan data at static pressure.
Read guide ↗Calculate greenhouse floor area, approximate volume, a source-specific summer exhaust reference, equivalent ACH, and an optional nominal intake-area check.
Read guide ↗Size greenhouse intake openings from stated fan geometry, then check free area, pressure drop, screens, shutters, and staged operation before installation.
Read guide ↗Place the exhaust fan and intake as one airflow system. Use this planning guide to avoid shortcut paths, restrictions, and common layout mistakes.
Read guide ↗Use a practical decision matrix to judge passive greenhouse ventilation, opening layout, weather dependence, restrictions, and when powered backup is needed.
Read guide ↗Exhaust fans exchange air with outdoors; circulation fans mix air inside. Use a symptom-based matrix to find which job or system check is missing.
Read guide ↗A measurement-first winter ventilation guide for checking condensation, moisture sources, intended openings, uncontrolled leaks, and the next useful action.
Read guide ↗Screen a solar greenhouse fan setup for simultaneous panel power, daily energy, and optional battery reserve. Transparent formulas; no cooling or electrical-design guarantee.
Read guide ↗Compare three exact greenhouse exhaust fan models by airflow need, intake path, controls, opening, power, and environment—without fake testing or universal rankings.
Read guide ↗Troubleshoot weak greenhouse ventilation by tracing controls, openings, airflow path, delivery clues, and weather limits before replacing equipment.
Read guide ↗Trace internal greenhouse airflow, separate circulation from outside-air exchange, and find the next check for stagnant or uneven conditions.
Read guide ↗Use a practical summer cooling sequence to separate solar load, restricted ventilation, stagnant air, and climate limits before adding equipment.
Read guide ↗Topic
Practical, evidence-led guides for this part of the greenhouse climate system.
Use a practical humidity-control loop to diagnose high or low greenhouse humidity without relying on one universal RH target.
Read guide ↗Diagnose greenhouse condensation by tracking where and when water appears, then address moisture sources, cold surfaces, stagnant air, and useful air exchange in the right order.
Read guide ↗Topic
Practical, evidence-led guides for this part of the greenhouse climate system.
Browse chronological archive ↗Build greenhouse automation around one observable control path. Map its sensor, decision, action, verification, and fallback before expanding the system.
Read guide ↗Prepare greenhouse climate controls before conditions change. Check each response path, compare expected and observed behavior, and record PASS, WATCH, SERVICE, or STOP.
Read guide ↗A greenhouse thermostat must match the fan job and documented control requirements. Use this worksheet to decide FIT, VERIFY, SKIP, or STOP without guessing.
Read guide ↗Build a bounded greenhouse monitoring workflow that turns sensor readings into alerts, logs, inspections, or stop conditions without universal thresholds.
Read guide ↗Verify an automatic greenhouse vent opener against the exact vent, manual, geometry, limits, and seasonal conditions before assuming fit.
Read guide ↗Topic
Practical, evidence-led guides for this part of the greenhouse climate system.
Solar greenhouse ventilation starts with required airflow, not panel wattage. Use this planning sequence to test energy assumptions and find stop conditions before spending money.
Read guide ↗Evaporative cooling can lower incoming-air temperature but adds moisture. Measure humidity, shade and airflow conditions before deciding whether it fits.
Read guide ↗Estimate shade-cloth area from measured rectangular greenhouse panels, then record shade percentage safely without treating it as a temperature forecast.
Read guide ↗Topic
Practical, evidence-led guides for this part of the greenhouse climate system.
Choose a representative canopy-level sensor location, avoid radiation and equipment bias, and verify the reading with a practical worksheet.
Read guide ↗Diagnose greenhouse temperature swings with a staged control framework, symptom matrix, and reusable response log—without relying on universal setpoints.
Read guide ↗
